Skip to content

Welding cobot with 1900 mm reach – Fairino FR-5 WML

The Fairino FR-5 WML is the cobot with the longest reach in the FR series: 1900 mm with a 5 kg payload. With a MIG/MAG torch and a seventh axis it covers a whole 2400 mm welding table from one position, and a program is created by guiding the arm by hand and saving a few points in the Welderstal welding application.

The video is in Polish with English subtitles.

  • 0:00 FR-5 WML cobot: 1900 mm reach and 5 kg payload
  • 0:57 Reach and motion
  • 1:49 A move across the whole table
  • 2:48 Starting from the application

What does the video show?

Adam Ryguła from Welderstal presents the Fairino FR-5 WML cobot on a welding station. The arm carries a MIG/MAG welding torch with a seventh axis. The video is just under four minutes long and shows three things: the cobot’s parameters, guiding the arm by hand, and writing and running a simple program. You will find more welding videos in our video library.

What are the FR-5 WML parameters?

ParameterValue
Arm reach1900 mm, the longest in the FR series
Payload5 kg
Repeatability±0.1 mm
Number of axes6
On the arm in the videoMIG/MAG torch with a seventh axis

This reach works best in cobot welding. A 5 kg payload is enough for a torch with its equipment, and the long arm reaches places where smaller models would need the cobot or the part to be repositioned.

How does the FR-5 WML compare with other FR arms?

ArmReachPayloadRepeatability
FR3-WMS622 mm3 kg±0.02 mm
FR3-WML922 mm3 kg±0.05 mm
FR5922 mm5 kg±0.02 mm
FR5-WML1900 mm5 kg±0.1 mm
FR101400 mm10 kg±0.05 mm
FR201854 mm20 kg±0.1 mm

The FR5-WML has more than twice the reach of the FR5 with the same payload. The price of the long arm is a repeatability of ±0.1 mm instead of ±0.02 mm. All arms in the series are listed on the Fairino cobots page.

How is the arm guided by hand?

The cobot is positioned by guiding the arm by hand. In the video the control is set so that the arm moves freely. The sensitivity of the guiding can be adjusted, so the operator sets it to suit themselves and the weight of the equipment. We teach this in our cobot operator training.

How do you write a program for the cobot? Four steps

The program is created in the Welderstal welding application on the cobot’s tablet. It is one of our plugins:

  1. A move along the table edge as the starting point.
  2. The first intermediate point.
  3. The second intermediate point.
  4. A straight-line motion to the end of the table, then a retreat to the safe points.

The table on the station is 2400 mm long. The arm covers all of it from a single mounting position.

Welderstal plugin for welding and palletising Welderstal plugin

Welderstal Welding

The program in the video was written in this application. The plugin guides the operator through motion sequences, points and basic process parameters.

  • ✓runs on the cobot's tablet
  • ✓points and motion set by guiding the arm
  • ✓part of every WS kit
See the Welderstal plugins →

How do you start the program and set a smooth transition?

The program is started from the same application. The cobot travels across the whole table, stopping at the saved points. The transition between points can be set to be smooth, without a stop at the intermediate point.

When to choose the FR-5 WML and when a smaller arm?

  • Large structures and long welds: the FR5-WML, that is the WS-5 WML kit. The arm covers the part from a single position.
  • Smaller parts where accuracy matters: the WS-5 on the FR5 arm, with 922 mm reach and ±0.02 mm repeatability.
  • A part longer than the arm’s reach: a kit with a linear track or with a positioner.

What is the difference between the arm and a ready station?

The FR-5 WML is the arm on its own. At Welderstal it is the base of the ready welding cobot WS-5 WML: the arm is joined by a torch and equipment, mounting on the PIN 28 system, the welding plugin, process configuration, commissioning and operator training. After the station starts work, technical support remains available.

Want to check whether this reach is enough for your station? Describe your process and we will select the model and the kit.

FAQ

Frequently asked questions

What reach and payload does the Fairino FR-5 WML cobot have?
A reach of 1900 mm and a payload of 5 kg. This is the longest reach in the FR series. The arm's repeatability is ±0.1 mm and it has 6 axes.
What is the FR-5 WML best suited to?
Welding processes, especially long welds and large structures that smaller arms cannot cover from a single position. The cobot can be used in other processes as well.
How is the FR-5 WML cobot programmed?
The arm is guided by hand to each point and the points are saved in the Welderstal welding application. In the video the program consists of a move along the table edge, two intermediate points and a straight-line motion. The program is started from the same application.
Can the FR-5 WML cover a whole welding table?
In the video the table is 2400 mm long and fits entirely within the arm's reach from a single mounting position.